Laserfiche WebLink
Exhibit B <br /> � 6.11 Oniine Help <br /> This test verifies that online help is available to the CAD dispatcher. <br /> Test Procedure <br /> 1. Bring up oniine help. <br /> Expected Results <br /> Verify that oniine help is displayed artd has usefu!information. <br /> 6.12 Command Line Entry <br /> This test verifies that the CAD dispatcher can use the command line interface to perform common <br /> CAD dispatching functions. <br /> Test Procedure <br /> 1. Add a new call using the command line interface. <br /> 2, Assign several units to the call using the command line interFace. <br /> 3. Add call narrative to the call using the command line interface. <br /> 4. Clear the call using the command line irrtetfiace. <br /> Expecbed Results <br /> Verify that all these functions work the same as their UI counterparts. <br /> 7.0 Test Scripts-Palladium Mapping <br /> These tests should be completed in the presence of a customer representative and a Lucent Public <br /> Safety Systems (LPSS) represerrtative. <br /> This procedure assumes that the mapping product has been correctly installed on the customers <br /> CAD positians with CAD configured to send messages to the map. In order for mapping to work <br /> properly,the following processes must be running (in addition to CAD and its associated processes): <br /> . Mapout.exe <br /> . CommAgent.exe <br /> . Maverick.exe <br /> 7.1 Basic Functionality <br /> Test Procedure <br /> With the processes above running, <br /> 1. Select the Call pull down menu from CAD's main menu. <br /> 2. Select Map Operations. <br /> 3. With the mapping application running and the entire area map viewable, select Zoom on the <br /> Ma O erations window. <br /> LUCENT TECHNOLOGlES -PROPRIETARY <br /> Use Pursuant to Company Instructions - <br /> Revised: 03/17l99 Page 16 <br /> _ _.._ _ . <br />