Agmt05 Moffatt & Nichol Engineer

Browse Search

EXHIBIT"A" SCOPE OF SERVICES AND FEE SCOPE OF WORK The consultant shall provide engineering, permitting, bid support, and construction support services for the lagoon maintenance dredging, which are anticipated to include the following activities: 1. Hydrographic Survey Coordination The consultant shall coordinate with a sub-consultant to perform a confirmatory hydrographic condition survey of Zones 8-1, 9 and 9-2 to verify that the 2005 comprehensive survey is representative of current bathymetry. Because of the high unit cost of dredging anticipated for this round of dredging, it will be important to accurately estimate dredging volumes. This will also be important in preparation of permit applications, bid documents, and engineers estimate. From the survey results, the consultant shall confirm dredging limits and volumes. 2. Design Memorandum The consultant shall develop a design memorandum for the proposed work, which shall include a description of dredging activities, identification of potential disposal locations, duration of work, and construction costs. Disposal location feasibility shall include assessment of temporarily stockpiling the material and trucking it to offsite authorized disposal sites such as landfills/recycling plants, or used for construction fill for a local project. The consultant shall include in the memo, a recommended Schedule of Work Activities including design and construction phases. This memo shall be provided to the agencies during permit processing. 3. Regulatory Support The consultant shall provide regulatory support including preparation of new permit applications and response to agency requests for further information and clarifieations. The following approvals shall be sought: • Tier 1 Exemption from further sediment testing; • New Water Quality Certification; • New Corps Nationwide Permit; • Final closeout approval, which includes submission of Notice of Completion of Work and Post Dredge Survey. 4. Prepare Bid Documents The consultant shall prepare for the City, a Bid Document package, which shall consist of Design Drawings, Technical Specifications, and a Bid Schedule. The Design Drawings shall include delineation of limits of work, toe of rock slope, bathymetric soundings, and up to six cross-sections. Other areas of interest (contractor staging area, areas of avoidance, existing docks, etc) shall be noted as necessary. Submittals shall be provided at 75% and 100% complete stages. Page 4 of 9 ATTY/AGR/2013/AMENDMENTS/AMEND NO.4 MOFFATT AND NICHOL REV:07-09-13 VR