Agmt19 Donald M. Duggan dba Skyrak Engineering Services

Browse Search

EXHIBIT "A" SCOPE OF SERVICES 1. Introduction The City of Redwood City has identified several tasks that are a continuation of work previously performed as part of the seismic upgrade program. Under a separate Agreement executed in 2012 with G&E Engineering Systems, Inc. (G&E), G&E prepared a design package for the Seismic Upgrade of Peninsula Tank No. 2. The package included drawings, specifications and an engineer's cost estimate. The City now wishes to issue this project for bid. G&E will close operations in the near future. The Consultant will update the design package and deliver as described in the present Scope of Work. Tasks 1, 2 and 3, below, describe the completion of the bid documents, consulting services during bid, and consulting services during construction, respectively. In addition, the City requires the Consultant to provide support on other ongoing capital improvement projects. This work is described in Task 4, below. The primary need is to support the City on peer review of seismic engineering matters during construction of the California Reservoir. Other needs to be determined and can be assigned to various water infrastructure sites throughout the City. Consulting will be requested on an as -needed basis. 2. Scope of Work Task 1.0: Seismic Upgrade of Peninsula Tank No. 2 — Update and Completion of Design Package Consultant shall develop bid package; ensure all comments to work performed by G&E are adequately addressed. And incorporate any remaining review comments. Consultant shall facilitate a review of the drawing package by an experienced piling contractor to identify any constructability challenges. Consultant shall make any necessary drawing revisions to address constructability issues. The City shall finalize the specifications (Project Manual) based on the specification set submitted to the City by G&E on March 14, 2017. If Consultant identifies any specification revisions that are necessary, such as to address constructability issues, Consultant shall communicate the changes to the City. The City shall be responsible for updating the specifications. Consultant shall update the construction cost estimate prepared by G&E to include cost changes due to any design changes and escalate the estimated costs to correspond to an early 2019 construction date. Deliverables, Task 1.0: 1. Memo summarizing results of conversation with piling contractor. 2. One hard copy ANSI D (22 in. x 34 in.), wet stamped, of design drawings (8 sheets total). 3. One electronic copy (AutoCAD) of the drawing package. 4. Construction Cost calculation (Excel spreadsheet). Task 2.0: Seismic Upgrade of Peninsula Tank No. 2 — Consulting Services during Bid Page 9 of 11 REV: 02-11-19 PR ATTY/AGR.2019.035/Donald M Dugan Skyrak Engineering Services