Agmt19 Alta Planning + Design, Inc.

Browse Search

marking, and striping elements and locations. Plans shall identify the standard referenced, size, color, and location of each, sign, marking, or stripe. Grading Plans Consultant shall prepare grading plans to show proposed gutter line grading for proper drainage. Sidewalk grading shall be provided, as necessary, where grading differs from the typical sections. Drainage Plans Consultant shall prepare drainage plans to show proposed storm drain modifications to apply proper drainage in the existing storm drain system, as required. UtilitV Relocation Plans These plans shall show existing underground and over- head utilities such as sewer, water, electrical, gas, and telecom that need to be relocated due to the project, as required. Traffic Signal, Lighting. and Electrical Plans If a new signal pole or signal equipment is needed for installation of pedestrian hybrid beacon, Consultant shall use the base map to prepare design -level plans showing the layout of the proposed pole and the traffic signal equipment, including the location(s) of the signal controller/cabinet, poles, or traffic signal interconnect, emergency vehicle pre-emption, traffic marking, striping and signage design. Designs will be in accordance with the City of Redwood City's current design standards, Caltrans design standards, and the CA MUTCD guidelines. The design shall include any additional detail and information needed for the pedestrian hybrid beacon or electrical equipment to be furnished and installed. Details Consultant shall prepare standard and special details that will be appropriate for the project design for each construction plan set. 65% Specifications and Estimate The Draft technical specifications shall be in City format. The draft specifications shall correlate with each of the bid items shown in the 65% cost estimate and the 65% plans. Likewise, Consultant shall prepare a corresponding itemized estimate of construction costs. The specifications shall be in MS Word, the estimate shall be in MS Excel format. It is assumed the City will provide the front end "boilerplate" specifications. Consultant shall transmit the 65% PS&E to the City for review and attend a meeting to review the documents. Based on City comments received, Consultant shall move forward with final 90% PS&E after approval from the City (see Task 7). Task 3 Deliverables: • 65% PS&E - Two (2) hardcopy sets of 24" X 36" plan documents, along with 8.5" X 11" specifications and estimates and topographic survey. Electronic versions shall be provided as well. Electronic drawings with be compatible with AutoCAD 2015. REV: 11-01-19 PR ATN/AGR.Amend No. 1/Alfa Planning + Design (Page 5 of 7)