Agmt07 Kennedy/Jenks Consultants

Browse Search

Task 1.2 - Project Meetings Same as Bid Package 6 Task 1.3 - City Progress Meetings Same as Bid Package 6 Task 1.4 - Purple Tearp Meetings Same as Bid Package 6 Task 1.5 - QA/QC Program Same as Bid Package 6 Task 2 - Preliminary Design Consultant shall provide the work that constitutes a preliminary level of design development, using the same scope of work as for Bid Package 6 excepted as noted below: 1. Evaluate up to 5 options for pipeline alignment, and prepare a preliminary design report summarizing the options, summarizing the evaluation, and recommending a preferred alternative. If additional design is required for the recommended alternative, such as a for a pipeline bridge or connections to an existing bridge, then a scope of work and budget will be prepared for this additional work, for City approval. 2. Coordinate a geotechnical investigation to be conducted by our subcontractor, Bay Area Geotechnical Group: a. Research and review pertinent geotechnical and geological maps and reports relevant to the site area with regards to the geologic history of the site and vicinity, as well as any previous reports that may be available for the site. b. Obtain a permit for drilling soil borings from the San Mateo County Department of Environmental Health, as required. c. Advance four CPT boreholes to approximate depths of 40 feet. The exploration will be directed by an engineer or geologist. The CPT drilling crew will maintain a continuous log of the materials encountered and measure the depth to groundwater, if encountered. Profiling of site materials from an environmental point of view is not included. When completed, the borings will be sealed with neat cement grout per standard protocol, and the soil cuttings will be left on site. The surface of the borings will be sealed with a bentonite plug. Agreement over $lOK KennedyJenks Rev-2 112603 24