Laserfiche WebLink
6.J. - Page 26 of 108 <br />2.0 GENERAL CONSTRUCTION <br />2.1 Cost is a factor in awarding the contract: however, only the proposals that meet <br />all the mandatory mechanical, electrical and photometric criteria in the RFP will be given <br />consideration. The contract will not be awarded solely based on price. <br />2.2 Shall be CSA Certified to U.S. Standards and shall comply with ANSI: C136.2, C136.10, <br />C136.14, C136.15, C135.31 and 0136.37. <br />2.3 a Luminaire housing to be fabricated from die cast aluminum low copper content alloy. <br />PUBLIC WORKS SERVICES DEPARTMENT <br />FY 2019-19 LED STREET LIGHT FIXTURES NIB <br />10 OF 36 <br />226 <br />1. <br />B 117-09 (Most current), Standard Practice for Operating Salt Spray (Fog) Apparatus <br />2. <br />D1654-08 (Most current), Standard Test Method for Evaluation of Painted or Coated <br />Specimens Subjected to Corrosive Environments <br />3. <br />D523-08 (Most current), Standard Test Method for Specular Gloss <br />4. <br />G154-06 (Most current), Standard Practice for Operating FIuorescent Light Apparatus for UV <br />Exposure of Nonmetallic Materials <br />C. <br />Council of the European Union (EC) <br />1. <br />RoI-IS Directive 2002/95/EC, on the restriction of the use of certain hazardous substances in <br />electrical and electronic equipment <br />D. <br />Illuminating Engineering Society of North America (IESNA or IES) <br />1, <br />DG -4-03 (Most current), Design Guide for Roadway Lighting Maintenance <br />2. <br />HB -10-11 (Most current), IES Lighting Handbook, 10th Edition <br />3. <br />LM -50-99 (Most current), IESNA Guide for Photometric Measurement of Roadway Lighting <br />Installations <br />4. <br />LM -61-06 (Most current), IESNA Approved Guide for Identifying Operating Factors <br />Influencing Measured Vs. Predicted Performance for Installed Outdoor High Intensity <br />Discharge (HID) Luminaires <br />5. <br />LM -79-08 (Most current), IESNA Approved Method for the Electrical and Photometric <br />Measurements of Solid -Sate Lighting Products <br />6. <br />LM -80-08 (Most current), IESNA Approved Method for Measuring Lumen Maintenance of <br />LED Light Sources <br />7. <br />RP -8-00 (Most current), ANSI / IESNA American National Standard Practice for Roadway <br />Lighting <br />8. <br />RP -16-10 (Most current), ANS WES Nomenclature and Definitions for Illuminating <br />Engineering <br />9. <br />TM -3-95 (Most current), A Discussion of Appendix E - "Classification of Luminaire Lighting <br />Distribution," from ANSFIESNA RP -8-83 <br />10. TM -15-11 (Most current), Luminaire Classification System for Outdoor Luminaires <br />11. TM -21-11 (Most current), Projecting Long Term Lumen Maintenance of LED Light Sources <br />E. <br />National <br />Electrical Manufacturers Association (NEMA) <br />1. <br />ANSI/NEMA/ANSLG C78.377-2008 (or latest), American National Standard for the <br />Chromaticity of Solid State Lighting Products <br />F. <br />National <br />Fire Protection Association (NFPA) <br />1. <br />70 —National Electrical Code (NEC) <br />G. <br />Underwriters Laboratories (UL) <br />I . <br />1449, Surge Protective Devices <br />2. <br />1598, Luminaires, <br />3. <br />8750, Light Emitting Diode (LED) Equipment for Use in Lighting Products LED Roadway <br />Specification <br />H. <br />CSA <br />1. <br />1598, Luminaires <br />2.0 GENERAL CONSTRUCTION <br />2.1 Cost is a factor in awarding the contract: however, only the proposals that meet <br />all the mandatory mechanical, electrical and photometric criteria in the RFP will be given <br />consideration. The contract will not be awarded solely based on price. <br />2.2 Shall be CSA Certified to U.S. Standards and shall comply with ANSI: C136.2, C136.10, <br />C136.14, C136.15, C135.31 and 0136.37. <br />2.3 a Luminaire housing to be fabricated from die cast aluminum low copper content alloy. <br />PUBLIC WORKS SERVICES DEPARTMENT <br />FY 2019-19 LED STREET LIGHT FIXTURES NIB <br />10 OF 36 <br />226 <br />