My WebLink
|
Help
|
About
|
Sign Out
Browse
Search
Ord95 2102
RedwoodCity
>
City Clerk
>
Resolutions
>
City Council
>
Working
>
Ordinances
>
1990-1999
>
Ord95 2102
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
10/11/2019 3:06:43 PM
Creation date
10/11/2019 3:06:40 PM
Metadata
Fields
Template:
CC Index
CC Index - Document Type
Ordinance
Agency Type
City Council
Date
11/27/1995
Description
ORDINANCE NO. 2102 ORDINANCE REPEALING ARTICLES IV, V, VI, VII, AND VIII OF CHAPTER 9 OF THE CODE OF THE CITY OF REDWOOD CITY; ADDING ARTICLES IV, V, VI, VII, AND VIII OF CHAPTER 9 TO THE CODE OF THE CITY OF REDWOOD CITY RELATING TO THE ESTABLISHMENT OF REGULATIONS AND STANDARDS FOR BUILDINGS AND STRUCTURES IN THE CITY OF REDWOOD CITY AND ADOPTING BY REFERENCE THE FOLLOWING CODES: "THE UNIFORM BUILDING CODE 1994 EDITION"; "THE UNIFORM BUILDING SECURITY CODE, 1994 EDITION"; "THE UNIFORM HOUSING CODE, 1994 EDITION"; "THE UNIFORM MECHANICAL CODE, 1994 EDITION"; "THE UNIFORM PLUMBING CODE, 1994 EDITION"; AND "THE NATIONAL ELECTRICAL CODE, 1993 EDITION" "ARTICLE IV. BUILDING CODES" THE COUNCIL OF REDWOOD CITY DOES ORDAIN AS FOLLOWS
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
28
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
Show annotations
View images
View plain text
"Section 9.50. Appendix Chapter 33 of the Building Code is hereby <br /> amended to insert the words `City Engineer' at all locations in this appendix <br /> chapter where the words `Building Official' are found." <br /> Section 9.51. Section 2602.5.3 of the Building Code is hereby amended <br /> to read as follows: <br /> "Section 2602.5.3 Roofing. Foam plastic insulation meeting the <br /> requirements of Sections 2602.2, 2602.3, and 2602.4 may be used as part of a <br /> roof-covering assembly; provided, that the assembly with the foam plastic <br /> insulation is a Class A or B roof-covering when tested in accordance with U.B.C. <br /> Standard No. 15-2. Foam plastic insulation which is a part of a Class A or B <br /> roof-covering assembly need not meet with requirements of Sections 2602.2, <br /> 2602.3, and 2602.4; provided, that the assembly with the foam plastic insulation <br /> satisfactorily passes the test for insulated roof decks. <br /> Any roof covering installed in accordance with this code and the <br /> manufacturer's instructions may be applied over foam plastic insulation when the <br /> foam is separated from the interior of the building by plywood sheathing not less <br /> than one-half inch (1/2") in thickness bonded with exterior glue, with edges <br /> supported by blocking, tongue-and-groove joints or other approved type of edge <br /> support, or an equivalent material. The thermal barrier requirement is waived. <br /> For all roof applications, the smoke-developed rating shall not be limited. <br /> ORD-001 10 <br /> FXS:rg <br /> 10/23/95 <br /> 11/13/95R <br />
The URL can be used to link to this page
Your browser does not support the video tag.