Laserfiche WebLink
6.E. - Page 66 of 97 <br />• Standard style trailer hitch: '/2" reinforced hitch plate mounted to the rear of the <br />chassis frame with #2200 premier pintle hitch without air pot. Mount so that the <br />bottom of the eye is —30" (TBD), above the ground, unloaded. Install two (2) 1" <br />x 3" heavy duty D -rings for the trailer safety chains. Mount glad hands with <br />covers and 7 -wire electrical connectors. <br />• Cole Hersee Connector #12063-01 BX will be installed at the rear of truck. <br />• Two (2) 18" x 18" x 36" frame mounted toolbox located on the curbside and <br />driver's sides ahead of the rear wheels. <br />• Pull Tarp — A vinyl pull type tarp will be provided and installed. <br />• Anti -sail mud flaps with hooks installed behind the rear tires. <br />• Two (2) wheel chock holders mounted on the driver's side truck frame with <br />retainers. <br />• Two (2) 12" two rung grip strut step ladder (folding) located at the front <br />passenger and driver's side of the body. Grab handles will be mounted on each <br />side of the ladder attached to the body. These handles will be round stock and <br />run from the bottom of the top rail with clearance for fingers if there is a center <br />rail. Ladder and grab handles will be painted orange. <br />• A Whelen LED rotating beacon model L10 with amber lens will be provided. <br />Mounted on the top left side of the cab controlled by a switch inside the cab. <br />• Mobile Camera: A Pro -Vision Mobile Camera System will be installed. This <br />includes; a heavy duty monitor, wide angle camera, windshield mount base, and <br />double pivot monitor bracket and thread locker. <br />• Paint Black Underbody. Paint Body one color per customer. <br />• Run and Test all Installed Equipment <br />• Furnish Weight Slip <br />301 Page <br />276 <br />