Agmt08 Sensus Metering Systems - Laserfiche WebLink

Browse Search

Schedule F: Proiect Management Services 1. Sensus will provide project management (pm) services, at no additional cost to the customer, to ensure proper installation and operation of the Sensus FlexNet system based on the following criteria: Number of TGB's U to 3 U to 5 U to 10 . These are general guidelines that are negotiable between Sensus and the customer. Additional PM Services can be purchased at standard hourly/monthly rates. . - Note: Months of PM Service refers to calendar months. 2. Sensus FlexNet Project Manager Services will provide onsite services for the following: . Pre-deployment planning and customer review meetings . Project schedule development . Project Coordination with the customer and all subcontractors . Tower site preparation (electrical, mechanical, communications) . Tower Gateway Base Station (TGB) installation and commissioning . Regional Network Interface (RNI) installation and commissioning . Commissioning of the Communication link between the TGB and RNI . Testing of the data transfer to the customer billing system . RNI/MDM account setup . Training sessions for installers and FlexWare system operators (3-days) At Sensus discretion, training may be offsite or offered remotely. . Facilitate customer acceptance testing of the FlexNet system (phased acceptance) All projects will be deployed as per the agreed upon criteria outlined in the Sensus Statement of Work (SOW) and the Customer Acceptance Plan (CAP) 3. The PM will coordinate the Sensus system acceptance test with the customer according to the criteria identified and agreed upon in the CAP for each milestone of the project. 4. The PM will manage installation (subject to agreement between Sensus, customer and meter/SmartPoint installation provider), commissioning, optimization and acceptance of the first phase of the project. All other phases of the project will be limited to SmartPoint installations and will be managed by the installation contractor. Additional support will be provided remotely by the Sensus Technical Services group. As each phase is deployed, the Technical Services group will coordinate with the customer and the installer to achieve the milestone criteria identified in the CAP. When this read performance is achieved the customer will accept the individual route. 5. As each phase is accepted, technical support for all of the network equipment and SmartPoints within that project phase will be provided by the Sensus Technical Service group. On-going maintenance of this equipment becomes the responsibility of the customer. 6. The Sensus Technical Services group is available to assist with troubleshooting system issues.