Laserfiche WebLink
6.G. - Page 63 of 124 <br />ATTACHMENT B <br />October 14, 2020 <br />All installed switches and/or equipment control(s), must be properly labeled as to function and condition <br />(i.e., on, off, etc.). All required identification labels or placards, interior or exterior, to be permanent non - <br />fading (i.e., engraved or die -stamped) and affixed using rivets. Adhesive labels, metal or plastic, are <br />not acceptable <br />Any and all body attachments shall be installed using a rubber gasket material and attachment caulked <br />to prevent water leakage. <br />Vehicle Lightinc <br />Completed vehicle shall comply with FMVSS108 & CVC regulations. L.E.Q. Stophail/tum lights and back-up <br />lights shall be flush mounted, "Trucklite" or equal. Side marker lights may be Trucklite No.1 integral <br />reflector/light. Al wiring both internal and external to be loomed and fully protected. All lights will be LED. <br />Final Stacie Manufacturer: <br />Shall certify complete funcflionality of the completed unit per Federal DOT Reiquiations for Final Stage <br />Manufacturing. Decal shall be located on the driver's door. <br />Drawings: <br />Drawings for the body will be provided fair customer approval prior to production. <br />Pre. Construction Meeting: <br />A visit to the installer's facility to inspect the chassis. body and other equipment is recommended. This meeting <br />will be conducted prior to installing and manufacturing some of the equipment. [drawings may be provided for <br />approval at or before this meeting. <br />Pre-Pain#J Final inspection: <br />The customer will be notified upon request prior to the truck being painted to allow for inspection. <br />Customer is responsible for their travel arrangements. <br />Price excluding chassis: $76,388.00 <br />2% discount net 14 days -1.5 % Interest on outstanding past 30 <br />Price does not include tax or license fees <br />F.O.B. Redwood City, CA <br />■ Page 7 <br />311 <br />