Agmt21 Bear Electrical Solutions, Inc.

Browse Search

B. Contractor shall protect open excavations and trenches with covers, railings and fences as required, together with signs, lights and other warning devices sufficient to protect and maintain safe pedestrian, bicycle, and vehicular traffic through the work area to the satisfaction of the City Engineer. C. Contractor shall conduct operations in such a manner that existing facilities and utilities which are to remain in place will note be damaged. Excavation, trenching, and other work under or adjacent to existing pipelines, conduit runs, or structures of any kind, shall be protected in such a manner as not to interfere with the safe operation and use of such facilities. Should any damage be incurred to existing facilities or structures during the operations, the Contractor shall immediately notify the proper owners or authorities, and shall arrange for the immediate repair of the facilities at the Contractor's expense. D. The location of proposed signal and electrolier standards, pull boxes, conduits, cabinets, and other equipment shown on the plans is approximate only and the exact location of such shall be as established in the field by the City Engineer. E. Construction area shall be left in a clean, neat, and workmanlike condition. All construction waste, rubbish, and debris remaining upon completion of the work shall become the property of the Contractor unless otherwise specified herein or noted on the plans and shall be removed from the work -site by the Contractor and disposed of off-site in a lawful manner to the satisfaction of the City Engineer. F. Comply and conform to conditions and requirements indicated herein and specified under all other sections of these Specifications. 1.06 MAINTAINING EXISTING AND TEMPORARY ELECTRICAL SYSTEMS A. Traffic signal and street lighting system shutdowns shall be limited to periods between the hours of 9:00 AM and 3:00 PM. B. Existing street lighting and signal communication systems shall be maintained during construction operations. Maintain existing safety lighting on streets to the minimum required by the Special Provisions, or as required by the City Engineer. Maintenance of existing street light and traffic signal systems shall be considered as included in the contract lump sum prices for the work item involved and no additional compensation will be allowed therefore. C. The contractor shall place "Stop Ahead" and "Stop" signs to direct vehicle and pedestrian traffic through the intersection during traffic signal system shutdown. Temporary "Stop Ahead" and "Stop" signs shall be either covered or removed when the system is turned on. D. "Stop Ahead" and "Stop" signs shall be furnished by the contractor and shall conform to the provisions in the California MUTCD and Section 12-3.11, "Construction Area Signs", of the State Standard Specifications, except that the base material for the signs shall not be plywood. E. One "Stop Ahead" sign and two "Stop" signs shall be placed for each direction of traffic. Location of the signs shall be as directed by the City Engineer. F. Full compensation for furnishing, installing, maintaining and removing temporary "Stop Ahead" and "Stop" signs and for covering signs not in use shall be considered as included in the contract lump sum price paid for the work item involved and no additional compensation will be allowed therefore. REV: 12-21-2020 PR ATTY/AGR.2020.306/Bear Electrical Solutions (Page 21 of 35)