Agmt21 RRM Design Group - Laserfiche WebLink

Browse Search

creates and/or replaces 10,000 or more square feet of impervious surface) and will not require hydromodification management (i.e., project is located in an exempt area per Appendix H of the C.3 Regulated Projects Guide) but will need consider green infrastructure regardless to comply with the "no missed opportunities" of section C.3j. Deliverables: • One (1) draft drainage study and stormwater management plan • One (1) final drainage study and stormwater management plan • Provide native files Subtask F.6: Stormwater Pollution Prevention Plan (SWPPP) If the total area of construction disturbance including laydown area is greater than one acre, Consultant will prepare plans for temporary erosion control facilities. Temporary facilities will be proposed for the protection of graded areas and drainage devices. Details and appropriate notes for construction best management practices (BMP) and guidelines for implementation are proposed to be in conformance with the State of California Water Resources Board requirements and the approved staff report, including sediment control recommendations. The temporary erosion control plans will be incorporated into the project improvement plans as well as into the project SWPPP. Consultant will conduct a risk determination based on the project's topography, soil, schedule, location, and receiving water then prepare the SWPPP based on the project -specific risk level. This task includes preparing Permit Registration Documents using the SMARTS database for certification by the Client and submittal to the Water Boards. The SWPPP will be based on the 100% deliverables. This task does not include construction monitoring, QSP services, or SWPPP updates during construction. Deliverables: • One (I) erosion control plan • One (I) completed "Notice of Intent" application for stormwater discharge • One (I) stormwater pollution prevention report for upload to the SMARTS system • Provide native files Subtask F.7: Utility Calculations Consultant will calculate the sewer and water flows for the project site using City Design Criteria (Volume III) Attachment L (Sewage Generation Project Worksheet) and Attachment Q (Water Demand Projection Worksheet) to support the utility design. These attachments will be submitted with the D.8 subtask and 100% PS&E. Deliverables: • City Design Criteria Volume III Attachment L (Sewage Generation Project Worksheet) • City Design Criteria Volume III Attachment Q (Water Demand Projection Worksheet) REV: 08-04-2021 RL ATTY/AGR 2021 207/RRM (Downtown Parks and Bay Connectivity Project) (Page 22 of 32)