Laserfiche WebLink
REV: 04-29-25 LF <br /> - One (1) located in the L-4 compartment. <br /> - One (1) located in the L-5 compartment. <br /> - One (1) located in the R-2 compartment. <br /> - One (1) located in the R-3 compartment. <br /> - One (1) located in the R-4 compartment. <br /> - One (1) located in the R-5 compartment. <br /> - One (1) located in the TL-1 compartment. <br />ROLL OUT TRAY(S) <br />Each tray shall be fabricated of .190 inch (4.83 mm) thick 3003 grade or higher aluminum sheet <br />material with four (4) 3.00 inch (76.20 mm) side flanges, corner welded for maximum strength and <br />shall be as wide and as deep as compartment allows. Each tray shall have a dual-action sanded <br />finish applied unless otherwise specified. <br />The following shall be supplied: <br />ROLL-OUT ASSEMBLY/SLIDE MASTER <br />The floor mounted tray shall be full width and shall be secured to a (Slide Master) roll-out system <br />constructed of “heavy duty steel” with structural tube and channels. The slide assemblies shall <br />incorporate cadmium plated ball bearing roller slides and a latching device to hold the tray in the <br />stored position. <br />The tray shall have a 600# capacity and 100% extension. <br />There shall be a total quantity of six (6) provided. <br />Each slide shall be held in the locked position by a lever actuated twist lock. <br />Each Slide Master slide shall be wet painted {silver} in color. <br />ROLL-OUT ASSEMBLY/SLIDE MASTER <br />The adjustable tray shall be full width and shall be secured to a (Slide Master) roll-out system <br />constructed of “heavy duty steel” with structural tube and channels. The slide assemblies shall <br />incorporate cadmium plated ball bearing roller slides and a latching device to hold the tray in the <br />stored position. <br />The tray shall have a 600# capacity and 100% extension and adjustable height utilizing unistrut <br />materials. <br />There shall be a total quantity of two (2) provided. <br />Each slide shall be held in the locked position by a lever actuated twist lock. <br />ATTY/AGR.2025.089/Fire Apparatus Solutions (Purchase of Spartan-LTC 105' TDA) (Page 102 of 150)