Laserfiche WebLink
REV: 04-29-25 LF <br />MAXIMUM WHEEL BASE REQUIREMENT <br />The apparatus specified shall be constructed with no restrictions to the maximum wheelbase. <br />MODEL <br />The chassis shall be a Gladiator model. The cab and chassis shall include design considerations <br />for multiple emergency vehicle applications, rapid transit and maneuverability. The chassis shall <br />be manufactured for heavy-duty service with the strength and capacity to support a fully laden <br />apparatus, one hundred (100) percent of the time. <br />MODEL YEAR <br />The chassis shall have a vehicle identification number that reflects a 2026 model year. <br />COUNTRY OF SERVICE <br />The chassis shall be put in service in the country of United States of America (USA). <br />The chassis will meet applicable U.S.A. federal motor vehicle safety standards per CFR Title 49 <br />Chapter V Part 571 as clarified in the incomplete vehicle book per CFR Title 49 Chapter V Part <br />568 Section 4 which accompanies each chassis. The chassis manufacturer is not responsible for <br />compliance to state, regional, or local regulations. Vendor shall identify those regulations and <br />order any necessary optional equipment from the chassis manufacturer or their OEM needed to <br />be in compliance with those regulations. <br />CAB AND CHASSIS LABELING LANGUAGE <br />The cab and chassis shall include the applicable caution, warning, and safety notice labels with <br />text to be written in English. All applicable caution, warning, and safety notice labels shall be <br />Innovative Controls brand. Where applicable to the location within the specific layout and label <br />package of the cab and chassis, the labels shall include decorative chrome bezels. Designs shall <br />include bezels that fit individual labels or packaged configurations of labels in certain common <br />locations. <br />APPARATUS TYPE <br /> <br />The apparatus shall be a mid-mount aerial vehicle designed for emergency service use. The <br />apparatus shall be equipped with a mid-mount aerial ladder, elevating platform or water tower. <br />AERIAL HYDRAULIC GENERATOR <br />Chassis shall include aerial provisions for a chassis PTO driven hydraulic pump piggy-backed for <br />aerial device hydraulics and 120VAC hydraulic generator. <br />VEHICLE TYPE <br />The chassis shall be manufactured for use as a tractor type vehicle, designed to accept a trailer <br />though the use of a fifth wheel hitch. The trailer shall be supplied and installed by the apparatus <br />manufacturer. <br />ATTY/AGR.2025.089/Fire Apparatus Solutions (Purchase of Spartan-LTC 105' TDA) (Page 21 of 150)