Laserfiche WebLink
REV: 04-29-25 LF <br />AERIAL LADDER DEVICE DEMONSTRATION - (3) CONSECUTIVE DAYS <br />A factory trained and authorized instructor shall provide three (3) consecutive days of on-site <br />classes after apparatus acceptance. Topics covered in the class shall include: <br />•General familiarization and demonstration of aerial device <br />•Aerial apparatus safety including a review of all safety devices, interlocks, and operational <br />hazards <br />•Positioning and locating the vehicle for safe operations <br />•Chassis parking brakes and engagement of hydraulic system <br />•Deployment of stabilization devices and use of ground pads <br />•Operation of elevation, extension, and rotation of the aerial device <br />•Operation of waterway, nozzle, and other firefighting devices of aerial device <br />•Operation and use of breathing air system <br />•Specific aerial device maintenance and service areas for operators <br />•Shutdown and return to service operations <br />•Operation of tip controls and platform controls if equipped <br />Classes shall consist of presentations as well as hands-on demonstration. <br />MAXIMUM OVERALL LENGTH REQUIREMENT <br />The apparatus specified shall be constructed with no restrictions to the maximum overall length. <br />MAXIMUM OVERALL HEIGHT REQUIREMENT <br />The apparatus specified shall be constructed with no restrictions to the maximum overall height. <br />MAXIMUM OVERALL WIDTH <br />The apparatus specified shall be constructed as detailed and shall NOT exceed a Maximum <br />Overall Width of One Hundred (100”) inches. <br />This dimension shall include the primary construction of the apparatus body and chassis cab. Any <br />peripheral items shall not be incorporated into this measurement. <br />The items included, but not limited to, are: Rub Rails, Fenderettes, Mirrors, Lights, Handrails, <br />Front Bumpers, Cab Steps, Overlays, Etc. <br />ATTY/AGR.2025.089/Fire Apparatus Solutions (Purchase of Spartan-LTC 105' TDA) (Page 20 of 150)