Agmt25 Kalmikov Enterprises,Inc.

Browse Search

REV: 04-29-25 LF Two (2) spring-loaded hydraulic hold down hooks located outboard of the frame shall be installed to hold the cab securely to the frame. Once the hold-down hooks are set in place, it shall take the application of pressure from the hydraulic cab tilt lift pump to release the hooks. Two (2) cab tilt cylinders shall be provided with velocity fuses in each cylinder port. The cab tilt pivots shall be 1.90 inch ball and be anchored to frame brackets with 1.25 inch diameter studs. A steel safety channel assembly, painted safety yellow shall be installed on the right-side cab lift cylinder to prevent accidental cab lowering. The safety channel assembly shall fall over the lift cylinder when the cab is in the fully tilted position. A cable release system shall also be provided to retract the safety channel assembly from the lift cylinder to allow the lowering of the cab. CAB TILT AUXILIARY PUMP A manual cab tilt pump module shall be attached to the cab tilt pump mounting bracket. CAB TILT LIMIT SWITCH A cab tilt limit switch shall be installed. The switch will effectively limit the travel of the cab when being tilted. The limit adjustment of the switch shall be preset by the chassis manufacturer to prevent damage to the cab or any bumper mounted option mounted in the cab tilt arc. Further adjustment to the limit by the apparatus manufacturer shall be available to accommodate additional equipment. CAB TILT CONTROL RECEPTACLE The cab tilt control cable shall include a receptacle which shall be temporarily located on the right-hand chassis rail rear of the cab to provide a place to plug in the cab tilt remote control pendant. The tilt pump shall include 8.00 feet of cable with a six (6) pin Deutsch receptacle with a cap. The remote-control pendant shall include 20.00 feet of cable with a mating Deutsch connector. The remote-control pendant shall be shipped loose with the chassis. CAB TILT LOCK DOWN INDICATOR The cab dash shall include a message located within the dual air pressure gauge which shall alert the driver when the cab is unlocked and ajar. The alert message shall cease to be displayed when the cab is in the fully lowered position and the hold down hooks are secured and locked to the cab mounts. In addition to the alert message an audible alarm shall sound when the cab is unlocked and ajar and the parking brake is released. CAB WINDSHIELD The cab windshield shall have a surface area of 2969.88 square inches and be of a two (2) piece wraparound design for maximum visibility. The glass utilized for the windshield shall include standard automotive tint. The left and right windshield shall be fully interchangeable thereby minimizing stocking and replacement costs. ATTY/AGR.2025.089/Fire Apparatus Solutions (Purchase of Spartan-LTC 105' TDA) (Page 52 of 150)