Laserfiche WebLink
REV: 04-29-25 LF <br />STEP TRIM <br />Each cab entry door shall include a three step entry. The first step closest to the ground shall be <br />constructed of SAE 304 stainless steel with embossed perforations and diamond shaped cutout. <br />The perforations and cutouts shall allow water and other debris to flow through rather than <br />becoming trapped within the stepping surface. The step shall feature a splash guard to reduce <br />water and debris from splashing into the step. The splash guard shall have drainage holes <br />beneath the back of the step to allow debris and water to flow through rather than becoming <br />trapped within the stepping surface. The stainless-steel material shall have a number 8 mirror <br />finish. The lower step shall be mounted to a frame which is integral with the construction of the <br />cab for rigidity and strength. The middle step shall be integral with the cab construction and shall <br />be trimmed in 0.08 inch thick 3003-H22 embossed aluminum tread plate. <br />UNDER CAB ACCESS DOOR <br />The cab shall include an aluminum access door in the left crew step riser painted to match the <br />cab interior paint with a push and turn latch. The under cab access door shall provide access to <br />the diesel exhaust fluid fill. <br />INTERIOR DOOR TRIM <br />The interior trim on the doors of the cab shall consist of an aluminum panel constructed of Marine <br />Grade 5052-H32 0.13 of an inch thick aluminum plate. The door panels shall include a painted <br />finish. <br />DOOR TRIM KICKPLATE <br />The inner door panels shall include an aluminum tread kick plate which shall be fastened to the <br />lower portion of the door panels. <br />DOOR TRIM SCUFF PLATE <br />The trim along the front cab doors shall include a stainless-steel scuff plate which shall wrap <br />around the cab door slam posts approximately 1.25 inches and extend the full height of the door <br />openings. The scuff plates are intended to prevent the chipping of paint. <br />DOOR TRIM NAMEPLATE <br />The interior door trim on the front doors shall include a City nameplate which states the vehicle <br />was custom built for their department and city. <br />CAB DOOR TRIM REFLECTIVE <br />The interior of each door shall include high visibility reflective tape. A white reflective tape shall <br />be provided vertically along the rear outer edge of the door. The lowest portion of each door skin <br />shall include a reflective tape chevron with red and white stripes and a Spartan logo. The chevron <br />tape shall measure 6.00 inches in height. <br />ATTY/AGR.2025.089/Fire Apparatus Solutions (Purchase of Spartan-LTC 105' TDA) (Page 58 of 150)