Laserfiche WebLink
REV: 04-29-25 LF <br />the driver position within easy reach of the occupant. The seat back shall feature a contoured, <br />adjustable head rest. <br />OCCUPANT PROTECTION FFC <br />The forward-facing center seat positions shall be equipped with the RollTek™ rollover occupant <br />protection system which shall secure occupants, increase the survivable space within the cab and <br />protect against head/neck injuries in the event of a rollover accident. <br />The system shall function using a microprocessor-controlled, solid-state sensing device which, <br />when the system detects a side roll shall provide instantaneous occupant protection (less than <br />0.3 seconds from trigger to total deployment) by automatically initiating the following sequence: <br />1. The seat belt shall tighten around the occupant. <br />System Components Shall Include: <br />Integrated Roll Sensor IRS - detects an imminent rollover, activates protective devices and <br />records crash events. <br />Integrated Belt Pretension IBP with flip-up (non theatre) and fixed mechanical seats - tightens the <br />seat belt around occupant, securing occupant in seat. <br />Integrated Gas Pretension IGP with flip-up theatre style seats - tightens the seat belt around <br />occupant, securing occupant in seat. <br />SEAT FRAME FORWARD FACING <br />The forward-facing center seating positions shall include an enclosed style seat frame located <br />and installed at the rear wall. The seat frame shall measure 62.38 inches wide X 12.38 inches <br />high X 22.00 inches deep. The seat frame shall be constructed of Marine Grade 5052-H32 0.19 <br />inch thick aluminum plate. The seat box shall be painted with the same color as the remaining <br />interior. <br />SEAT FRAME FORWARD FACING STORAGE ACCESS <br />There shall be two (2) access points to the seat frame storage area, one (1) on each side of the <br />seat frame. Each access point shall be covered by a hinged door which measures 15.00 inches <br />in width X 10.63 inches in height with an opening that measures 13.75 inches wide X 10.00 inches <br />high. <br />SEAT MOUNTING FORWARD FACING CENTER <br />The forward-facing center seats shall offer a special mounting. The seats shall be installed 12.00 <br />inches apart offering additional room for each occupant. <br />CAB FRONT UNDERSEAT STORAGE ACCESS <br />The left and right under seat storage areas shall have a solid aluminum hinged door with non- <br />locking latch. <br />ATTY/AGR.2025.089/Fire Apparatus Solutions (Purchase of Spartan-LTC 105' TDA) (Page 65 of 150)