Agmt25 Kalmikov Enterprises,Inc.

Browse Search

REV: 04-29-25 LF The paint applied to the apparatus shall be PPG Industries Delta® brand, applied throughout a multi-step process including at least two coats of each color and clear coat finish. The coating shall be an infra-red, baked air dried. The coatings shall provide full gloss finished suitable for application by high-pressure airless or conventional low pressure air atomizing spray. The coatings shall not contain lead, cadmium or arsenic. The polyisocyanate component shall consist of only aliphatic isocyanates, with no portion being aromatic isocyanates in character. The solvents used in all components and products shall not contain ethylene glycol mono-ethyl ethers or their acetates (commercially recognized as cello solves), nor shall they contain any chlorinated hydrocarbons. The products shall have no adverse effects on the health or nor present any unusual hazard to personnel when used according to manufacturer's recommendations for handling and proper protective safety equipment, and for its intended use. The coating system, as supplied and recommended for application, shall meet all applicable federal, state and local laws and regulations now in force or at any time during the course of the Agreement. The manufacturer shall supply (upon request) for each product and component of the system, a properly complete OSHA “Safety Data Sheet”. The following documents of the issue in effect on the date of the invitation to quote form a part of this document to the extent specified herein: Federal Standards: Number 141A and 141B paint, varnish, lacquer and related material: methods of inspection, sampling, and testing. Military Standard: MIL-C 83486B Coating, Urethane, Aliphatic Isocyanates, for Aerospace applications. Industry Methods and Standards: ASTM Method of Analysis (American Society for testing and Materials). BMS 10-72A (Boeing Material Specifications). The entire exterior body structure (excluding roll-up doors) shall receive the primer coats and the finish coats. The apparatus body will be painted in a down draft type paint booth to reduce dust, dirt or impurities in the finish paint. The painted surfaces shall have a finish with no runs, sags, craters, pinholes or other defects. The coating will meet the following test performance properties as a minimum standard. BODY PAINT COLOR The apparatus body shall be painted to match the current City fleet fire equipment colors. Color samples shall be approved by City prior to painting. LINE-X COMPARTMENT FINISH The compartment interiors shall be coated with Line-X. ATTY/AGR.2025.089/Fire Apparatus Solutions (Purchase of Spartan-LTC 105' TDA) (Page 88 of 150)