Agmt25 HY Flooring and Gameline Painting, Inc.

Browse Search

Exhibit A SCOPE OF WORK Location:1120 Roosevelt Avenue, Redwood City, CA 94061 General Description: The City of Redwood City (City) Public Works Services (PWS) Department requires gym floor re-striping services. The Contractor shall provide all labor, materials, equipment, and supervision necessary to complete gym floor re-striping services in accordance with industry standards, safety regulations, and manufacturer specifications. All work shall be performed to ensure a durable, professional, and visually consistent finish as outlined in Appendix A. Project Schedule: The Project must be fully completed between the dates of December 22, 2025, and January 4, 2026. This project timeline is non-negotiable. Work on City observed holidays shall only be performed with City’s prior approval in writing. Description of Lump Sum (LS) Item: Surface Preparation •Inspect the existing gym floor surface prior to work. •Clean and prepare the floor to remove dirt, dust, grease, and any debris. •Remove existing vent cove base. •Sand the entire floor surface in Project Area to bare wood. •After sanding, apply two (2) coats of water-based polyurethane sealer to seal and protect the raw wood surface. Allow adequate drying between coats per manufacturer recommendations. •Protect adjacent surfaces, walls, and equipment from dust, overspray, or paint spills. Layout & Design •Striping layout shall be applied as indicated in project drawings. A digital striping plan/layout drawing and color selection submittal shall be submitted by Contractor to City for approval prior to work being performed. •Provide clear marking for the following courts and markings to be consistent with As-Built Layout: o Basketball court (main and auxiliary if applicable). o Volleyball court(s). o Badminton court(s). o Pickleball court(s). o Any additional specialty markings (logos, lettering, custom graphics). o The City of Redwood City logo with surrounding lettering shall be painted at the specified location and scaled per City-approved artwork. The City will provide the necessary vector files and work with Contractor to identify and approve appropriate colors. Striping Application •Use high-quality, gym floor–approved paint specifically designed for wood/urethane surfaces. •Apply paint in multiple coats as necessary. •Ensure crisp, straight, and consistent lines with no bleeding. •Allow sufficient drying/curing time between coats and prior to application of protective finish.