Reso25-05 0090 - PC Reso 1201 Main Street Mixed Use Project

Browse Search

ATTY/RESO.0090/PC RESO 1201 MAIN STREET MIXED USE PROJECT REV: 08-15-25 VR Page 22 of 32 # ENGINEERING & TRANSPORTATION Conditions Compliance along the project frontage. The project geotechnical engineer shall provide continuous site inspections during excavation, shoring, dewatering, trenching, and backfill operations at the Applicant’s expense. [COA] E44 Other Agency Permits – Union Pacific Rail Road. Obtain all required permits and approvals from the Union Pacific Rail Road . [Section 9.11 of Municipal Code][SDR] Prior to Building or Grading Permit Issuance # FIRE Conditions Compliance F1 Building Code Summary Analysis. Provide a building code summary analysis that includes the use and occupancy classification(s), type(s) of construction, occupancy separations or non-separated occupancy, number of stories, exterior opening analysis, maximum height above grade plane, floor area per floor, total floor area, and presence of and design standard for automatic sprinklers. [CFC 104.9][SDR] Prior to Building Permit Issuance F2 Construction Egress and Standpipes. During construction, provide a temporary or permanent stairway. As construction progresses, the stairway shall be extended to within one floor of the highest point of construction having secured decking or flooring. Not less than one Class I standpipe shall be provided for use during construction. Such standpipes shall be installed prior to construction exceeding 40 feet in height above the lowest level of fire department vehicle access. The standpipe(s) shall be provided with Fire Department hose connections at locations adjacent to the stairways and shall Íbe extended to within one floor of the highest point of construction having secured decking or flooring. [CFC §§3311.1 and 3313.1][SDR] Prior to Building Permit Issuance & During Construction F3 Site Safety Plans. Construction site safety plans for the construction process are to be approved by the Fire Marshal or his/her designee before Building Permit issuance. They must follow all requirements in Chapter 33 of the California Fire Code. Prior to Building Permit Issuance & During Construction F4 Fire Apparatus Access Roads. An approved fire apparatus access road must be provided [CFC §503.1.1] The approved AMMR shall be placed on the building permit application plans. Prior to Building Permit Issuance F5 Alternate Methods and Materials Request. Attach the approved Alternate Methods and Materials Request (AMMR) to the building permit application plan set. [COA] Prior to Building Permit Issuance F6 Aerial Fire Apparatus Access. Buildings greater than 30 feet in height require aerial (ladder truck) fire apparatus access, positioned parallel to the long side of the building. No overhead utility or power lines, horizontal or vertical fixed obstructions are to be located along the aerial fire apparatus access road, nor can they be located between the aerial fire apparatus access road and the building that may obstruct aerial fire apparatus operations. [CFC Appendix D§105.1] Prior to Building Permit Issuance & During Construction