Laserfiche WebLink
<br />covered in this submission. Does not constitute approval or deletion of <br />specified or required items not shown In the partial submission. <br />b. AMEND AND RESUBMIT - Considered IIUnfavorabJe Revie~. Material <br />submitted has major inconsistencies or errors which shall be resolved or <br />corrected by the Supplier and resubmitted for subsequent review by the <br />City. The City will note on its letter of transmittal to the Supplier whether a <br />full resubmlttal is required, or if only a partial resubmlttal of certain sections <br />is required. <br /> <br />D. Favorable .review of submittals shall apply In general design only. and shall in no <br />way relieve the Supplier from responsibility for errors or omissions contained therein <br />of Its obligation to meet safety requirements and aU other requirements of laws, and <br />will not constitute acceptance by the City of any responsibility for the accuracy, <br />coordination, and completeness of the submittals or the Items of equipment <br />represented on t~e submittals. <br /> <br />E. Unfavorable review of submittals, and the time required for subsequent preparation <br />and review of resubmittals, shall not relteve the Supplier from meeting other <br />schedule milestones and commitments, if applicable. <br /> <br />PART 2 - PRODUCTS <br />2.01 MODEL NUMBER <br /> <br />A. Flowserve 16 ENL. <br /> <br />2.02 PERFORMANCE AND DESIGN REQUIREMENTS <br /> <br />A. Pump Schedule <br /> <br />Item Main Pumps <br />Quantitv of Pumps 3 (MP-1, MP-2, MP-3) + 2 (MP-4 MP-5)* <br />Pumo Tvpe Vertical Turbine <br />Pump Installation Configuration . Existing suction barrel <br />Primary Point 3275 GPM @ 195 ft TDH <br />Maximum Capacity (Full Speed) 4150 GPM @ 120 ft TDH <br />(1.775 RPMl <br />Minimum Capacity (Full Speed) 1250 GPM @ 300 ft TDH <br />(1,775 RPM) <br />Secondary Point (Reduced Speed Capacity) 1250 GPM @ 177 ft TDH <br />(1,420 RPM) <br />Minimum Shutoff Head 380 ft <br />Maximum NPSH ReQuired @ Maximum Capacity 30.5 ft <br />Maximum Soeed 1.775 RPM <br />Minimum Operatina Speed 975 RPMu <br />Motor Horsepower 250 HP <br />Existing Suction Barrel Diameter See Attachment A (field verify) <br /> <br />t- <br /> <br />Shop Drawing Preparation Package <br />0988015.00 <br />C Kennedy/Jenks Consultants 2009 <br /> <br />Page 3 of8 <br /> <br />Vertical Turbine Pumps <br />