Laserfiche WebLink
6.1. C. - Page 10 <br />Bid specifications for Deere 310SJ or similar Wheel Loader Backhoe <br />Compliance <br />es <br />no <br />The backhoe shall be equipped with a rubber bumper /linkage style boom locks to keep <br />the backhoe from vibrating on the swing frame <br />es <br />no <br />Unit shall be equipped with two lever backhoe controls. <br />es <br />no <br />The swing casting shall have dual yokes: on top and on the bottom <br />Loader <br />es <br />no <br />Lift Capacity with 1 cu yd bucket (.77 cu m) at full height shall be at least 7419 Ibs (3368 <br />kg) <br />es <br />no <br />Dump Clearance @ 45 deg. shall be no less than 8 ft 10 in (2.69 m) <br />es <br />no <br />Digging depth below ground, bucket level shall be no less than 6.3 in. (160mm) <br />es <br />no <br />Bucket breakout force shall be no less than 11,160 lb (49.6 kN) <br />es <br />no <br />The loader shall have hydraulic self - leveling and bucket -level indicator. <br />es I <br />no <br />The loader shall have divergent loader arms for excellent visibility to the bucket <br />es <br />no <br />For truck loading, the loader arms will have a curved -knee design for loading into the <br />center of the truck bed <br />es <br />no <br />The loader control will be single -lever with electric clutch cutoff switch <br />es <br />no <br />The loader shall have a non - removable, hinged loader boom service lock. <br />8/9/2011 and 3:51 PM <br />Page 4 of 4 <br />