Agmt12 Kimberly-Horn and Associates, Inc.

Browse Search

EXHIBIT "A" , SCOPE OF SERVICES. TIME AND FEE SCHEDULES Massachusetts Avenue Crosswalk Beacon System at Arizona Way Project Design Scope of Work PROJECT DESCRIPTION: Consultant shall provide design and engineering services for the Massachusetts Avenue Crosswalk Beacon System at Arizona Way Project. The objectives of the Massachusetts Avenue Crosswalk Beacon System at Arizona Way ProJect are to install a rectangular repid flashing beacon system at the crosswalk crossing Massachusetts, as well as sidewalk, curb, and remp design adjacent to the crosswalk location. The project area is defined as the intersection for Massachusetts Avenue and Arizona Way. SCOPE OF SERVICES: Design services will include preparetion of plans, the technical provisions of the specifications, and engineer's opinion of probable construdion costs (estimate) for the instaliation of the crosswalk system as well as sidewalk, curb, and ramp design adjacent to the crosswalk location on Massachusetts Avenue atArizona Way. Design components shall include the following: • The illuminated crosswalk will be solar powered. If the City determines that a PG&E serviced installation is preferred prior to the start of design, KHA will provide this Type of design, and • Three (two sided) rectangular repid flashing beacon displays w/corresponding signs will be installed (one at each roadway edge and one in a new center median), and • A drainage inlet currently located on the south side of Massachusetts Avenue will be relocated as part of the new sidewalk bulb-out design, and • The new raised median will be designed to include additional reflectors to minimize motorists hitting the median during night operetions, and • Both pedestrian curb ramps adjacent to the new crosswalk will be designed to current ADA standards as well as the curb ramp at the southwest corner of the Massachusetts Avenue and Arizona Way intersec[ion used by pedestrians crossing Arizona Way will be redesigned to current ADA standards as part of the sidewalk bulb-out, and • The striping and pavement marking will be updated, as necessary, based on the new sign and curb installations, and • The new luminaire will be a cobra head type per the City of Redwood City standard E3, "Street Light (Single)". TASK 1—DATA COLLECTION Consultant shall: 1. Coordinate with the City of Redwood City to discuss the requirements of the project and to collect any data available (specifications, vendor type, as-built plans, aerials, utility contacts, etc.) for the design. 2. Condud a field review of the project area to collect necessary information for the project desfgn. ATTYIAGRYt012.020/KIMLEY-HORN Page 10 of 12 � � REV:02-24-12 VR �