Laserfiche WebLink
8.A. - Page 50 <br />Mitigation Measure Hazards -4: Soldering or welding shall not be performed <br />within 15 feet of dry grass or other natural fuels. A fire extinguisher shall be <br />available at the project site at all times when welding or performing other <br />activities that can generate sparks. <br />Mitigation Measure Hazards -5: Building design, private lot and common area <br />landscaping, and maintenance practices shall adhere to the regulations and <br />performance standards included in the Fuel Management Plan. Defensible space <br />shall be a consideration when designing landscape plans. Landscape plans shall be <br />reviewed and approved by the City. <br />Finding: Implementation of Mitigation Measures Hazards -2, Hazards -3, Hazards -4, and <br />Hazards -5 would reduce the potential for increased risk of fire to a less -than - <br />significant. <br />Facts in Support of Finding: Mitigation Measure Hazards -2 would require that any smoking <br />occur only in designated areas and away from areas where there are materials <br />prone to combustion, reducing the chance of ignition and fire. Mitigation Measure <br />Hazards -3 requires that fire extinguishers and other firefighting tools would be <br />located in certain equipment and vehicles. Mitigation Measure Hazards -3 would <br />require outfitting equipment with spark arresters and mufflers. This measure <br />would aid in fire response and fire prevention, thereby reducing the fire threat. <br />Mitigation Measure Hazards -4 would restrict the location of soldering and <br />welding and would require that a fire extinguisher to be available during these <br />activities, thereby reducing the risk of ignition and ensuring a means of response <br />to fire. Mitigation Measure Hazards -4 requires adherence to the Fuel Management <br />Plan, including management of defensible space, which would reduce the <br />potential for ignition and spread of fires during construction and post - <br />construction. <br />Potential Impact 3.6-8 is described from page 3.6-7 to page 3.6-8 of the Draft <br />EiR, which are hereby incorporated by reference. <br />Hydrology and Water Quality <br />Impact 3.7-1 <br />Impact: The proposed project has the potential to result in water erosion. The proposed <br />work would also include temporary diversion of water flow in the drainage swale, <br />and grading for the roadbed, culvert, and rip -rap during construction. The project <br />would have the potential to substantially alter the existing drainage pattern of the <br />site or area, including through the alteration of the course of a stream or river in a <br />manner that would result in substantial erosion or siltation on or off site. <br />Mitigation: Mitigation Measure Hydrology -1: Prior to issuance of grading permits or <br />approval of improvement plans, the applicant shall submit a detailed Erosion <br />Control Plan (ECP) to the Director of Public Works of Redwood City for review <br />and approval. The purpose of the ECP shall be to mitigate erosion and <br />34 <br />