My WebLink
|
Help
|
About
|
Sign Out
Browse
Search
AgdaPkt 2014-01-13 Interview, Closed and Regular
RedwoodCity
>
City Clerk
>
Agenda Packets
>
2010-2019
>
2014
>
AgdaPkt 2014-01-13 Interview, Closed and Regular
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
1/14/2014 8:33:06 AM
Creation date
1/9/2014 9:29:21 PM
Metadata
Fields
Template:
CC Index
CC Index - Document Type
Agenda Packet
Meeting Type
Regular
Agency Type
City Council
Date
1/13/2014
Jump to thumbnail
< previous set
next set >
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
543
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
Show annotations
View images
View plain text
nearby lightning strike and other interferences. Surge suppressio7.1.A. - Page 16 <br /> comply with UL 1449 or UL 1283. <br /> • Maximum allowed Amperage at LED (Drive current) is 1000 mA. <br /> • Below is a table of current HPS / LPS luminaire wattages and maximum <br /> acceptable wattage for LED replacement <br /> Maximum allowable <br /> Current <br /> Type wattage for LED <br /> wattage replacement <br /> high pressure sodium <br /> 70 51 <br /> 100 65 <br /> 2010 120 <br /> — <br /> low pressure sodium, <br /> 90 51 <br /> 135 65 <br /> 13.3. Optical <br /> • Luminaires shall have a minimum of 80 lumens per watt. <br /> • Luminaires shall have a minimum color rendering index (CRI) of 70. <br /> • Luminaires shall have a correlated color temperature (CCT) of 4,000 K + 500 K <br /> (between 3,500 K and 4,500 K inclusive). <br /> 13.4. Physical & Mechanical <br /> • Luminaire will be a single, self- contained device and require no assembly on- <br /> site. Power supply for the luminaire is integral to the unit. <br /> • Luminaire's internal and external parts shall be serviceable without removing <br /> assembly from mount. <br /> • Luminaire shall be covered against rust for the life of the warranty period. <br /> • Optical assembly of the luminaire must be protected against dust and moisture <br /> intrusion to at least an ANSI /IEC rating of IP66. <br /> • Each luminaire shall have an ANSI C136.10- compliant, locking type photo - <br /> control receptacle. <br /> • Field wires connected to the luminaire must terminate on a barrier type <br /> terminal block secured to the house. Terminal screws must be captive and <br /> equipped with wire grips for conductors up to No. 6. Each terminal position <br /> must be clearly identified. <br /> • Power supply must be rated for outdoor operation and have an ANSI /IEC rating <br /> of at least IP65. <br /> • Power supply must be rated for a minimum operational life at least equal to the <br /> minimum operational life of the luminaire. <br /> PUBLIC WORKS DIVISION 11 <br /> 2013 -2014 LED Street Luminaires <br />
The URL can be used to link to this page
Your browser does not support the video tag.