Agmt04 ABA-Anderson Brule - Laserfiche WebLink

Browse Search

._-----_.~-- Benchmarks and horizontal control monuments to be used for the project shall be shown and described in detail. Indicate limits of work. ~ Demolition Plan: Indicate structures, foundations, pavements (including type and thickness) to be removed and salvaged; utility lines to be removed, rerouted or abandoned and trees and shrubs to be removed or salvaged. ~ Site Plan: Locate all new work by coordinates and/or dimensions from prominent existing features or survey base lines. Use same scale and orientation as the existing topography plan. Locate contractor's temporary storage area as necessary. ~ Grading Plan: . Show finished contours at one-foot intervals using solid lines and all existing contours using dash lines. . Clearly show where all surface water will drain to catch basins or other outlets. . Use spot elevations to clarify grading requirements, drainage flow patterns, set curbs, gutters, pavement corners, ground and pavement surfaces at building corners, top of catch basins, etc... . Show finished floor and pad elevations, borrow pit/disposal areas (if applicable), and location of soil borings. Use same scale and orientation as the topography plan. ~ Utility Plan: . Locate by dimensions and/or coordinates all new water. sanitary sewer and storm drain lines and appurtenances. . Indicate sizes of all pipes, top and invert elevations of manholes and catch basins and points of connection. . Indicate size of all thrust restraints and their parameters. ~ Profiles: . Show profiles for all sanitary sewer and storm drain systems. 'I . Indicate manholes, invert elevations, distance between manholes, slope of pipes, existing and proposed utilities and finish grades. . Show profile for water mains where possible interferences with existing utilities may occur. -6-