Agmt15 Scheidt & Bachmann USA, Inc.

Browse Search

be loosened or removed, possibly compromising rain tightness, dust tightness, structural integrity,or cause damage to the equipment or the housing contents. Equipment housings are to provide easily accessible threaded studs or a threaded pad to provide electrical grounding and shall be grounded to this point unless it is to be intentionally insulated. All ferrous metal is to be protected from rust by galvanizing and/or rust-inhibiting primer and paint. All equipment housings will be designed to allow for installation and mounting to concrete islands with sturdy flanges and supporting anchor bolts. All equipment that is located adjacent to any laneway shall be protected by bollards in a way and format that: a. Protects"all" of the machinery enclosure from damage by a vehicte. b. Does not hinder the opening or servicing of the machinery itself. c. Does not impede or inconvenience customers from interaction with the machinery itself and where possible also acts to provide customers with the same protection as intended for the machinery itself. Contractor will provide, recommend the location, and install protective bollards. Z. Indoor Equipment/Enclosure General Requirements Supply all cabinets and other enclosures required to properly house and protect the control system equipment. All equipment housings are to be equipped with a locking mechanism unique to the City. All equipment that is located adjacent to any laneway shall be protected by bollards in a way and format that: a. Protects"all" of the machinery enclosure from damage by a vehicle. b. Does not hinder the opening or servicing of the machinery itself. c. Does not impede or inconvenience customers from interaction with the machinery itself and where possible also acts to provide customers with the same protection as intended for the machinery itself. All Indoor and Outdoor equipment enclosures shall be equipped with a locking mechanism with the capability of being re-programmed/keyed to protect against tampering. 3. H_igh Resolution Camera and Intercom Control The CMS will provide customer assistance and monitoring over vehicle ingress/egress to and from the facilities. The City requires that all machinery having customer interaction to be equipped with a high- REV:09-10-15 VR Page 18 of 61 ATTY/AGR.2015.217/Scheidt& Bachmann USA, Inc. Parking Garage Equipment