Laserfiche WebLink
Care should be taken not to spray the bait block or the caution words on the face <br />of the label. <br />At each subsequent inspection, the caution tag shall be painted a different color <br />and be visible from the manhole opening as follows: <br />First Subsequent Inspection <br />Second Subsequent Inspection <br />Third Subsequent Inspection <br />May <br />Yellow <br />September <br />Violet <br />January <br />White <br />Each application of paint must completely obliterate the prior color and must not <br />be sprayed onto the bait block. The over -spray of paint onto bait blocks will be <br />sufficient cause to reject the work and the Contractor will be required to re- <br />inspect all of his or her work and remove the over spray from the bait blocks <br />before his or her work will be approved. <br />Bait block replacement shall be accomplished by first removing all of the old bait <br />from the manhole and then installing a new bait block in the manner prescribed in <br />METHOD OF BAIT INSTALLATION of these specifications (including the <br />attachment of a new "Caution" tag painted red on its back side). <br />The nail and tie -wire used to secure the old block must be of the prescribed type <br />as set out in the Materials and Equipment section of these specifications and if <br />still in good condition and firmly anchored between the sidewall and manhole <br />cover rim seat may be left in place and reused. <br />All old bait, unusable tie -wires, and nails must be removed from the manhole and <br />disposed of by the Contractor at an authorized site. <br />I. Kev and Color Code to be Used on Record of Work: <br />+ (black) <br />O+ + O <br />(black and red) <br />O (red) <br />/ (red) <br />F (black) <br />P (black) <br />REV: 01-11-17 MI <br />Bait inspection <br />Inspection and bait replacement <br />Reinstallation including nail, wire, tag, <br />and bait block <br />Rat activity <br />Flooded manhole <br />Paved over <br />Page 10 of 17 <br />ATTY/AGR.2017.003/Dewey Services, Inc. - Vector Control Services <br />