Laserfiche WebLink
2661 2700 et seq.; and all applicable safety and local ordinances. Annually, Contractor <br />2662 shall provide the SBWMA and Agency with documentation of such compliance for <br />2663 each vehicle. For example, with regard to CARB regulations, such documentation <br />2664 shall demonstrate, at a minimum, the vehicle number, make, model, year, control <br />2665 technology used or planned, and the year that the control technology was applied or <br />2666 is planned to be applied. Contractor shall not load vehicles in excess of the <br />2667 manufacturer's recommendations or limitations imposed by federal, State, or local <br />2668 weight restrictions on vehicles or roads. <br />2669 Contractor equipment used for Collection services shall be registered with the <br />2670 California Department of Motor Vehicles. Equipment shall comply with US EPA <br />2671 noise emission regulations, currently codified at 40 CFR Part 205, and other <br />2672 applicable noise control regulations, and shall incorporate noise control features <br />2673 throughout the entire vehicle. <br />2674 Annually, Contractor shall have each Collection vehicle weighed at the Designated <br />2675 Transfer and Processing Facility to determine the unloaded weight ("tare weight") of <br />2676 the vehicle, and the total loaded weight of each load delivered to the Designated <br />2677 Transfer and Processing Facility. Upon a major repair that could affect the <br />2678 Collection vehicle tare weight, Contractor shall have the Collection vehicle re - <br />2679 weighed to establish a new tare weight. Contractor shall track and make <br />2680 adjustments to routes to eliminate ongoing over -weights associated with individual <br />2681 routes. <br />2682 8.05 CONTAINERS <br />2683 <br />A. General. Contractor shall provide all Containers, Bins, Kitchen Pails, and Drop <br />2684 <br />Boxes, as appropriate, to all Customers as part of its obligations under this <br />2685 <br />Agreement. Contractor shall ensure that Agency encroachment or other required <br />2686 <br />permits are obtained by Customer prior to delivering Containers. As of the <br />2687 <br />Commencement Date, all Containers may be used. Contractor -provided Containers <br />2688 <br />shall be designed and constructed to be watertight and prevent the leakage of <br />2689 <br />liquids. All Carts shall be manufactured by injection or rotational molding methods; <br />2690 <br />contain post -consumer content; and meet the Container design and performance <br />2691 <br />requirements provided in Attachment D — Container Specifications. Containers <br />2692 <br />provided to Customers shall have a useful life of ten (10) years as evidenced by a <br />2693 <br />manufacturer's warranty or other documentation acceptable to the Agency. <br />2694 <br />All Containers with a capacity of one (1) cubic yard or more shall meet applicable <br />2695 <br />federal, State, and local regulations for Bin safety; shall be covered with attached <br />2696 <br />lids; and shall have the capability to be locked if required or requested by Customer <br />2697 <br />or Agency. <br />2698 <br />All Containers shall be maintained in a safe, serviceable, and functional condition. <br />2699 B. Container Specifications <br />2700 1. Sizes. The Container sizes to be provided to Single -Family, Multi -Family, <br />2701 Commercial, and Agency Facility Customers are specified in Attachment D. <br />2702 Contractor shall provide Customers with a choice of Container capacities <br />2703 specified in Attachment D, and Customers may select their preferred Container <br />2704 size(s). <br />REV: 03-16-18 MI <br />Page 65 of 126 <br />ATTY/AGR.2018.054/Recology of San Mateo <br />