Laserfiche WebLink
6.2.13. - Page 21 <br />be loosened or removed, possibly compromising rain tightness, dust tightness, structural <br />integrity, or cause damage to the equipment or the housing contents. <br />Equipment housings are to provide easily accessible threaded studs or a threaded pad to <br />provide electrical grounding and shall be grounded to this point unless it is to be intentionally <br />insulated. <br />All ferrous metal is to be protected from rust by galvanizing and/or rust -inhibiting primer and <br />paint. <br />All equipment housings will be designed to allow for installation and mounting to concrete <br />islands with sturdy flanges and supporting anchor bolts. <br />All equipment that is located adjacent to any Janeway shall be protected by bollards in a way <br />and format that: <br />a. Protects "all' of the machinery enclosure from damage by a vehicle. <br />b. Does not hinder the opening or servicing of the machinery itself. <br />c. Does not Impede or inconvenience customers from interaction with the machinery <br />itself and where possible also acts to provide customers with the same protection as <br />intended for the machinery itself. <br />Contractor will provide, recommend the location, and Install protective bollards. <br />2. Indoor Equipment/Enclosure General Requirements <br />Supply all cabinets and other enclosures required to properly house and protect the control <br />system equipment. <br />All equipment housings are to be equipped with a locking mechanism unique to the City. <br />All equipment that is located adjacent to any laneway shall be protected by bollards in a way <br />and format that: <br />a. Protects "all' of the machinery enclosure from damage by a vehicle. <br />b. Does not hinder the opening or servicing of the machinery itself. <br />c. Does not impede or inconvenience customers from interaction with the machinery <br />itself and where possible also acts to provide customers with the same protection as <br />intended for the machinery itself. <br />All Indoor and Outdoor equipment enclosures shall be equipped with a locking mechanism <br />with the capability of being re-programmed/keyed to protect against tampering. <br />3. Hiah Resolution Camera and Intercom Control <br />The CMS will provide customer assistance and monitoring over vehicle ingress/egress to and <br />from the facilities. <br />The City requires that all machinery having customer interaction to be equipped with a high - <br />REV: 09-10-15 VR <br />Page 18 of 61 <br />ATTY/AGR.2015.217/Scheidt & Bachmann USA, Inc. Parking Garage Equipment <br />