Res19 15769 - Laserfiche WebLink

Browse Search

05/20/2019 Volumes Il & 111, CBC, and other State regulations. This shall be submitted as part of the building permit application. [SDR] [ENGINEERING] 26. As-Builts -Provide "as -built" or "record" drawings, to be submitted in paper, PDF and AutoCAD formats prior to project sign -off. [COA][ENGINEERING] FEMA and Base Flood Elevations 27. Finished Floor Elevation (FFE) - The lowest finished floor elevation (FFE) is shown to be 9.7 feet, based on NAVD88. FEMA has notified all the municipalities within San Mateo County that new Flood Insurance Rate Maps (FIRMs) will become effective on April 5, 2019. The project site is currently located within Zone X and is not within a Special Flood Hazard Area. Upon FEMA's approval of the new maps, the project will be located within Zone AE, with a base flood elevation of 10 feet, and will be within a Special Flood Hazard Area. Chapter 41 of the City's municipal code and engineering standards require that new construction and substantial improvements to existing structures be built with the lowest finished floor elevation set at or above the base flood elevation, with a recommendation of setting the lowest finished floor elevation 1 foot above the base flood elevation. Chapter 41 of the City's municipal code requires that all building permits and project plans meet the requirements of the FIRM in effect at the time of permit issuance, regardless of when the project was submitted or deemed complete. [SDR][ENGINEERING] 28. Elevation Certificate - If all or a portion of the site is within a Special Flood Hazard Area (as shown on the latest FEMA Flood Insurance Rate Maps in effect at building permit issuance), upon completion of the structure, the elevation of the lowest floor (including basement when applicable) shall be certified by a registered professional engineer or land surveyor, verified by the City's Building Inspector to be properly elevated, and provided to the Floodplain Administrator. Where required by Chapter 41 of the City's Municipal Code, the applicant shall also submit certification by a registered professional engineer or architect that the standards for elevation and floodproofing have been satisfied. [SDR][ENGINEERING] Utility Infrastructure Improvements 29. Conformance with the City's Engineering Standards - All public improvements shall be designed and constructed in accordance with the Cm's Engineering Standards. [][ENGINEERING] 30. City Encroachment Permits - Obtain an Encroachment Permit from the Engineering and Transportation Division for work listed below. This permit shall be obtained prior to the commencement of construction of the road, utilities, or any site improvements. [SDR][ENGINEERING] a. Work in the City public right-of-way, easements or property in which the City holds an interest. b. Work requiring a grading permit. Grading permits require a Plot and Finished Grading Plan prepared by a California -registered Civil Engineer. c. Work requiring on-site shoring which affects the public right of way d. Work using the public right-of-way for any fixed structure (awnings, roof overhangs, fixed planters, etc.). Insurance, meeting the City's standards, is required. This permit will be recorded against the property. ATTY/RESO.0051 CC RESO APPROVING PROJECT— BROADWAY PLAZA RESO. NO. 15769 REV: 05-15-19 PR MUFF No. 601 Page 13 of 22