AgdaPkt 2008-01-28 Clsd and Reg - Laserfiche WebLink

Browse Search

6.1E Page 19 It is anticipated that 214 labor hours will be required for Construction Management Services for the Group 1 Bid. Task 8.4 - Cross-Connection Testing and Conversion Consultant shall provide oversight during the cross-connection tests. These tests will be conducted by the contractor and performed before connecting the Customer's recycled water system to the Water Utility's recycled water system at any use-site where both recycled and potable water are present. It is anticipated that 3 labor hours per site will be required for Cross- Connection Testing and Conversion. Task 8.5 - Coordinate Final Inspections and Contract Close-out Consultant will coordinate with the Program to conduct a final on-site inspection to satisfy State DHS requirements. This inspection will be coordinated with the final cross-connection test and will cover the following: . Check for use of proper equipment for retrofit installation . Placement of all required tags, labels and signs . Check for runoff or windblown spray outside the approved use area . Check for ponding of recycled water within the use area . Check spray patterns for encroachment on public facilities It is anticipated that three labor hours will be required for final inspections and close out for each site. Task 9 - Customer Site Supervisor Training Consultant shall assist City in conducting a formal training program for Customer Site Supervisors prior to the scheduled retrofit start-up date. The training program will need to fulfill the requirements of the Discharge Permit for Water Recycling and the California Department of Health Services requirements. Sufficient training sessions shall be convened by the City to adequately train all customers and comply with the Discharge Permit for Water Recycling. The City will schedule the customer site training sessions. Up to 80 labor hours of support are budgeted for customer training on an as-requested basis. Task 10 - As-Built Site Retrofit Documents Submit to City hard copy of drawings and specifications showing record information that Consultant considers significant and accurate based on the drawings, shop drawings and other record documents as annotated by Contractor to show all changes made during construction and furnished to Consultant. It is anticipated that 5 labor hours will be required to provide as-built drawings for each site. Task 11 - Program Management Support Services Agreement over $1 OK KennedyJenks Rev-2 112603 14