Agmt23 BKF Engineers Price Tract Pump Station

Browse Search

REV: 11-07-23 SK plant palette. In addition, Consultant and subconsultant will prepare a Stormwater Management Plan (SMP) exhibit identifying the drainage management area and the proposed BMP location and will complete the County’s C.3 and C.6 Development Review Checklist. Consultant will incorporate the 60% BMP design into the 60% Initial Design Submittal for the City, provide responses to City comments, and revise and resubmit the 60% Initial Design submittal as described under Task 6. • 90% BMP Design: Consultant and CALA will progress the 60% BMP Design to the 90% level. Consultant and subconsultant will formalize all BMP sizing calculations. Consultant will refine the plans, specifications and cost estimate, and formalize the County’s C.3 and C.6 Development Review Checklist. Consultant will incorporate the 90% BMP design documents into the 90% Semi-Final Design Submittal for the City and respond to comments as described under Task 7. • 100% BMP Design: Consultant and subconsultant, CALA, will progress the 90% BMP Design to the 100% level. Consultant will incorporate the 100% BMP design documents into the 100% Final Design Submittal to the City. • BMP Construction: Consultant and subconsultant, CALA, will be available during the bidding phase and construction phase as described under Task 9 to assist with BMP-related items. Budget has been included to respond to bidder questions and RFIs during bidding phase, prepare addenda as warranted, and assist the design team in responding to construction RFIs and submittals. Optional Task 6 – PLC/SCADA PROGRAMMING • Subconsultant, DTN, will provide PLC/SCADA programming and provide startup assistance during construction. DTN will be assisted by EDCCO Group, who will serve as a subcontractor to DTN. SCADA/PLC/OIT programming standards will follow the City’s standards established by the EDCCO Group. PLC hardware is to be the responsibility of others, and all hardware will be furnished by others. A factory test is included and assumes the PLC hardware is readily available from others for the test. The factory test may be witnessed by the City. Field startup assistance includes two days from EDCCO working with the Contractor in the field. Operational testing and alarm tests, etc. will also be performed by EDCCO Group with DTN’s involvement as a coordinator / facilitator. The System SCADA/PLC programming documentation shall be per current standard practice and consistent with previous projects EDCCO Group has completed with the City. Optional Task 8: ADDITIONAL BORING • If the condition assessment of the existing outfall or the hydraulic modeling of the outfall pipe shows that the outfall requires replacement, then an additional boring is required near the outfall location. For this optional task, ATTY/AGR.2023.241/BKF Engineers (Price Tract Pump Station Design) (Page 32 of 68)