Ord 2542 - Laserfiche WebLink

Browse Search

ATTY/ORD.0010/CC ORD AMENDING MUNI CODE CH.18, 27A, 30 – EXHIBIT C REV: 09-17-24 VR Page 27 of 65 F. Drainage. 1. Drainage structures shall be designed in accordance with the City Engineering Standards to avoid lot damage by the 100-year storm/flood hazard. 2. Drainage from individual lots shall be retained onsite and the overflow be toward the street or toward a natural drainage course. For downhill side lots in hillside divisions, drainage shall be designed to avoid or minimize the effect thereof on lots located at lower elevations. 3. Wherever a natural or a planned drainage course traverses a subdivision, a maintenance and/or open space easement shall be dedicated by the subdivider for the safe disposal of storm waters. 4 . Drainage structures shall be designed and installed to a grade, which installation shall be confirmed by the City Engineer. . 5. Please add reference to the City’s GI ordinance, as may be amended from time to time. G. The subdivider shall contact the applicable franchisee of a CATV franchise in the City to determine the requirements of the franchise for the installation of a CATV underground system for that subdivision and shall perform its construction activities in a manner which will facilitate the installation of such system by the franchisee. H. The subdivider shall be responsible for the design, installation, repair, replacement, and/or upgrade of flood protection improvements, including but not limited to levees, if the existing flood protection improvements fail to meet the applicable flood protection standards, including but not limited to the City’s adopted sea level rise assessment, at the time of the application. Sec. 30.36. – LOT DESIGN: With the exception of urban lot splits and streamlined approvals of for development projects of 10 units or less, all subdivisions shall contain the following lot design features. A. Suitability for Designated Purpose. All subdivisions shall create lots capable of being built upon in accordance with applicable development regulations. B. Size, Shape and Frontage. The minimum area and dimensions shall conform to the standard requirements of the Zoning Code or to any approved planned development permit. Where unusual topography exists, lot area shall be increased in accordance with the provisions Article 32.2 of the Zoning Code. Lot depths shall not exceed two and one-half (2½) times their average width.