Laserfiche WebLink
REV: 04-29-25 LF <br />with a clear optic collimator/metalized reflector assembly on the top, and a clear non-optic <br />polycarbonate lens. Each lamp head shall draw 6.0 amps and generate 7,800 lumens. Each <br />lamp head shall measure 6.37 inches in height X 8.97 inches in width. Each lamp head housing <br />shall be chrome plated. <br />SIDE SCENE LIGHT LOCATION <br />The scene lighting located on the left and right sides of the cab shall be mounted rearward of the <br />cab “B” pillar in the 10.00 inch raised roof portion of the cab between the front and rear crew <br />doors. <br />SIDE SCENE ACTIVATION <br />The scene lights shall be activated by two (2) rocker switches located in the switch panel, one (1) <br />for each light. The rocker switches shall be labeled “DRIVER SCENE” for the left light and <br />“OFFICER SCENE” for the right light. <br />REAR SCENE LIGHTS <br />The rear of the cab shall include Whelen model M9LZC scene lighting. The Whelen light shall be <br />surface mounted and shall feature LED lighting with 8 to 32-degree internal optics. <br />REAR SCENE LIGHT LOCATION <br />The rear scene light shall be located at the top of the rear wall in the center. <br />REAR SCENE LIGHT ACTIVATION <br />The rear scene lighting shall be activated via a single rocker switch located inside the cab on the <br />switch panel. <br />GROUND LIGHTS <br />Each door shall include a Tecniq T44 LED ground light mounted to the underside of the cab step <br />below each door. The lights shall include a polycarbonate lens, a housing which is vibration <br />welded and LEDs which shall be shock mounted for extended life. <br />GROUND LIGHTS <br />The ground lighting shall be activated when the parking brake is set, by the opening of the door <br />on the respective cab side, and a rocker switch in the dash panel. <br />LOWER CAB STEP LIGHTS <br />The middle step located at each door shall include a Tecniq T44 LED light which shall activate <br />with the opening of the respective door. The lights shall include a polycarbonate lens, a housing <br />which is vibration welded and LEDs which shall be shock mounted for extended life. <br />ATTY/AGR.2025.089/Fire Apparatus Solutions (Purchase of Spartan-LTC 105' TDA) (Page 73 of 150)