Laserfiche WebLink
REV: 04-29-25 LF <br />Vendor/City supplied Revolution XE Model 12017 Little Giant folding ladder stored dimensions <br />will be 55.50” high x 23.75” wide x 9.25” deep. The weight will be 31.50 lbs. <br />NUPLA PIKE POLES <br />- two (2) Nupla 8 foot (2.4 m) Nuplaglas Classic Round Pike Pole(s), model YPD-8. <br />- two (2) Nupla 6 foot (1.8 m) Nuplaglas Classic Round Pike Pole(s), model YPD-6. <br />- two (2) Nupla 12 foot (3.0 m) Nuplaglas Roof Ventilation Pole(s) with aluminum D-Grip handle, <br />model RH-12D shall be provided by the servicing dealership before the unit is placed into service. <br />- two (2) Nupla 8 foot (2.4 m) Nuplaglas Roof Ventilation Pole(s)with aluminum D-Grip handle, <br />model RH-8DA. <br />One (1) Duo-Safety 6 foot (2.0 m) pike pole(s) with fiberglass handle(s) <br />- one (1) Fire Hooks Unlimited 8 foot (2.5 m) solid fiberglass Multi-Purpose Hook(s), model MPH- <br />8. <br />- one (1) Fire Hooks Unlimited 8 foot (2.4 m) solid white ash National Hook(s), model NH-8. <br />JOHNSON BAR STORAGE IN LADDER STORAGE <br />One (1) trough shall be sized appropriately to store the City's Johnson bar (8” x 8” x 170” weighing <br />approximately 97 pounds). <br />OUTRIGGER ACCESSORIES <br />The outriggers shall be controlled from the sides of the apparatus. A control box with a hinged <br />door shall be provided and installed, one (1) each side at the front of the trailer adjacent to the <br />respective outrigger, installed per NFPA, lighted for night operations. There will be a side-to-side <br />indicator furnished and installed at each side of the apparatus to aid in leveling the unit. <br />The outrigger control doors shall be fabricated from Mirror finish stainless steel. <br />AUXILIARY GROUND PAD STORAGE HOLDERS <br />Two (2) drop-in type auxiliary ground pad storage holders shall be provided. Each holder <br />assembly shall be designed to hold a single auxiliary ground pad. The storage holders shall be <br />located under the apparatus, one (1) each side as close to the outrigger/stabilizer as design <br />allows. <br />The holders shall be fabricated of aluminum. <br />OUTRIGGER COVERS <br />Painted stainless steel covers shall be installed over the outrigger areas, one (1) on each side. <br />Each active cover shall mount directly to the stabilizer arm and extend with the outrigger. <br />ATTY/AGR.2025.089/Fire Apparatus Solutions (Purchase of Spartan-LTC 105' TDA) (Page 99 of 150)