Agmt25 YEI Engineers, Inc. - Laserfiche WebLink

Browse Search

REV: 11-21-25 LF f.Specialty Systems including, but not limited to: security, fire protection, building automation systems (BAS), lighting controls, and information technology systems and Infrastructure: (1) Symbol list coordinated with symbols on plans; (2) Single line diagrams of services and systems; (3) Location and type of reporting/monitoring devices; (4) Power sources; (5) Code analysis for fire protection systems; and, (6) Reporting and Monitoring Architecture for BAS, security, fire protection, and lighting controls. g.Landscaping Drawings (1) Site plans that clearly show: a)Plant selection and planting layout; and, b)Irrigation system with points-of-connection to site utilities. h.Other Items (1) Outline Technical Specifications describing the size, character, and quality of the entire Project, including locations of materials; types of structural, mechanical, electrical, and security systems; (2) Engineering calculations clearly presented for all disciplines, including realistic loads, and sufficiently complete for preparation of Construction Documents to proceed; (3) Room Data Sheets itemizing all requirements for each space including: staff positions, furnishings, equipment including equipment lists by room for fixed and moveable equipment, security provisions, power, telephone and data requirements, etc.; (4) Updated Energy Consumption Report; and, (5) List of all existing permit-required confined spaces. 3.At 100% completion of the Design Development Phase, Consultant must furnish to City Staff for purposes of checking and acceptance of Design Development Phase Documents: a.One reproducible copy of all Design Development Phase Documents identified above; b.One copy of the updated Project Schedule; c.A Revised Statement of Probable Construction Cost. The construction cost estimate must include all fixed equipment. A separate estimate must be prepared and submitted for all movable equipment. D.Construction Documents Phase 1.Based on the City Staff-accepted Design Development Phase Documents, Consultant must prepare final Construction Drawings ready for Bidding and construction purposes including but not limited to: a.Drawings (1) Consultant must complete, coordinate, and assemble the Drawings; (2) Consultant must verify that all Drawing numbers, detail numbers, and Project Manual references indicated on the Drawings are correct; and, ATTY/AGR.2025.320/YEI Engineers, Inc. (As-Needed MEP Engineering Services) (Page 17 of 26)