Reso25-12 0126 PC Reso 1320 Marshall Street Project

Browse Search

ATTY/RESO.0126/PC RESO 1320 MARSHALL STREET PROJECT – EXHIBIT A REV: 12-10-25 VR Page 10 of 13 # ENGINEERING & TRANSPORTATION Conditions Compliance F2 Fire Hydrant and Sprinkler Feed Lines. All water mains that provide a water supply for fire protection (both to fire hydrants and fire service systems) shall not be less than eight inches in diameter. The Applicant is responsible for fulfilling this condition and shall submit plans to the Fire Marshal’s Office for review and approval. Water supply for fire protection is required to be installed in accordance with water purveyor’s specifications. The water supply shall be tested, flushed and approved operable prior to any combustible construction materials being placed on the site. Staged construction shall ensure that the necessary water supply is maintained from stage to stage in the construction planning. [CFC §507.1.1 as amended by the City of Redwood City Code of Ordinances §12.16][SDR] Prior to Building Permit Issuance F3 Fire Lane Signs. Mark fire apparatus access roads with permanent NO PARKING-FIRE LANE signs and/or painted curbs in accordance with state and local standards. Submit plans to the Fire Marshal’s Office for review and approval. [CFC 503.3] [SDR] Prior to Certificate of Occupancy F4 Public Safety Key Boxes. Provide approved Knox® key boxes adjacent to each building entrance. Public safety key boxes shall be recessed and installed adjacent to each entrance within 60 to 72 inches of the finished walking surface. There shall be four sets of keys: each set containing building access, fire equipment room access, fire cache room, elevator keys, utility room keys and other keys essential for emergency operations. [CFC §506.1][SDR] Prior to Certificate of Occupancy # HOUSING Conditions Compliance H1 Affordable Housing Agreement(s). Execute and record an Affordable Housing Agreement(s) with the City against the market- rate development restricting the ownership of 5 townhome units to be sold to moderate income households as defined in Section 29.2 of Zoning Code. The affordable units shall be comprised of five (5) three-bedroom units restricted for moderate income household for a period of 30 years from the date of sale of each individual affordable unit. The Agreement(s) shall specify the number, type, location, size, and phasing of all affordable units, and provisions for setting sales price, marketing, income certification, and screening of potential buyers of units, including the financing of ongoing administrative and monitoring costs, as applicable, consistent with the approved Affordable Housing Plan. The Agreement(s) shall be in a form acceptable to the City Attorney and the Community Development Director. [Section 29.7 F of Zoning Code][SDR] Prior to Building Permit Issuance or Final Map whichever comes first H2 Interior Finishes & Amenities. Add a note to building permit plans specifying that all interior finishes and amenities in the affordable units will be the equivalent to the standard amenities in the market rate units. After sheetrock inspection but prior to installation, the Applicant shall provide the Project Planner and Housing Staff with the information needed to verify that all interior finishes and amenities in the affordable units are equivalent to standard amenities used in market rate units, including the opportunity to perform on-site inspection(s). [Section 29.6 of Zoning Code][SDR] Prior to Certificate of Occupancy per Building # PLANNING Conditions Compliance P1 Use. The project approval is for General Residential use only. Lodging is prohibited. Any change to the approved use is subject to review and approval by the City. Notwithstanding permitted uses in the district where the project is located, only land uses reviewed and approved in this application are permitted for the project location. Any change in use beyond the permitted uses in the district are subject to review and approval by the City. [COA] Ongoing