Agmt26 Ensight Technologies, LLC - PARCS System

Browse Search

REV: 01-05-26 LR total system on a turnkey basis. The following are the elements of work for the Contractor: 1. Perform the required demolition and preparatory work, including but not limited to: Demolition and removal as required of existing Scheidt and Bachmann PARCS equipment, including lane equipment, payment kiosks, headend equipment, and appropriate abandoned conduit/wiring, as well as removal of Owner-designated existing static signs, as specified in Drawings. Repair and sealing of unused mounting holes and cutting/capping of unused conduit stubs is also required. Any new conduit, wiring, electrical panel tie-ins, data communications wiring to network demarcation points, mounting assemblies, and wire terminations are also to be provided by Contractor according to Specifications and Drawings. 2. Furnish a new gateless, ticketless PARCS system including Fixed License Plate Recognition (LPR) cameras at the entry and exit lanes and the connecting tunnel lanes between the Jefferson and Winslow Garages to record arrival and departure of parkers and to determine whether payment was made upon arrival (and additional payment made for overstays) or that a parker is on a list of authorized monthly/contract parkers, as well as additional reporting functionality for vehicles parking in the Winslow Garage as described in Specification 111248.10. This system must also support parking validations from Owner-designated nearby merchants, including but not limited to the Century 20 Theater above the Jefferson Garage, as further detailed in Specification 111224.14. The system shall not require any driver interaction with PARCS equipment in the entry and exit lanes. The LPR cameras may be located overhead or on the PARCS islands. Contractor must determine if existing pavement-embedded magnetic loops can be utilized as LPR trigger loops and, if not, cut and install new loops or alternately propose usage of “virtual loops.” 3. Furnish new Pay-by-Plate Multi-Space Meter (MSM) kiosks which can accept payment by cash, credit card or by scanned pre-payment or validation code, located and in the quantities as shown in Drawings, and equipped with features as described in the relevant Specification. 4. Furnish new Proximity Card Reader system and Access Control Software to control the existing rolling overhead door at the western entry lane of the Winslow Garage, as further described in Specification 111224.14. 5. Furnish four (4) new Mobile LPR systems, mounted and installed by Contractor in Owner-provided parking enforcement vehicles, including integration with the Gateless PARCS software and the Owner’s Citation Management System, as described further in Specifications, to allow seamless parking enforcement activity. ATTY/AGR.2026.001/EnSight Technologies (Parking Access and Revenue Control System (PARCS)) (Page 24 of 167)