Agmt10 Recology San Mateo County

Browse Search

• • 2413 shall provide the SBWMA and Agency with documentation of such compliance for 2414 each vehicle. For example, with regard to CARB regulations, such documentation 2415 shall demonstrate, at a minimum, the vehicle number, make, model, year, control 2416 technology used or planned, and the year that the control technology was applied or 2417 is planned to be applied. Contractor shall not load vehicles in excess of the 2418 manufacturer's recommendations or limitations imposed by federal, State, or local 2419 weight restrictions on vehicles or roads. 2420 Contractor equipment used for Solid Waste, Targeted Recyclable Materials, and 2421 Organic Materials services shall be registered with the California Department of 2422 Motor Vehicles. Equipment shall comply with US EPA noise emission regulations, 2423 currently codified at 40 CFR Part 205 and other applicable noise control regulations, 2424 and shall incorporate noise control features throughout the entire vehicle. 2425 Annually, Contractor shall have each Collection vehicle weighed at the Designated 2426 Transfer and Processing Facility to determine the unloaded weight ( "tare weight ") of 2427 the vehicle, and the total loaded weight of each load delivered to the Designated 2428 Transfer and Processing Facility. Upon a major repair that could affect the 2429 Collection vehicle tare weight, Contractor shall have the Collection vehicle re- 2430 weighed to establish a new tare weight. Contractor shall track and make 2431 adjustments to routes to eliminate ongoing over - weights associated with individual 2432 routes. 2433 8.05 CONTAINERS 2434 A. General. Contractor shall provide all Carts, Bins, Compactors, Kitchen Pails, and 2435 Drop Boxes, as appropriate, to all Customers as part of its obligations under this 2436 Agreement. Contractor shall ensure that Agency encroachment or other required 2437 permits are obtained by Customer prior to delivering Containers. As of the 2438 Commencement Date, all Single- Family Carts and Kitchen Pails must be new while 2439 other Containers may be used. Contractor - provided Containers shall be designed 2440 and constructed to be watertight and prevent the leakage of liquids. All Carts shall 2441 be manufactured by injection or rotational molding methods; contain post- consumer 2442 content; and meet the Cart design and performance requirements provided in 2443 Attachment D — Container Specifications. Carts provided to Customers shall have 2444 a useful life of ten (10) years as evidenced by a manufacturer's warranty or other 2445 documentation acceptable to the Agency. 2446 All Containers with a capacity of one (1) cubic yard or more shall meet applicable 2447 federal, State, and local regulations for Bin safety; shall be covered with attached 2448 lids; and shall have the capability to be locked if required or requested by Customer 2449 or Agency. 2450 All Containers shall be maintained in a safe, serviceable, and functional condition. 2451 B. Container Specifications 2452 1. Sizes. The Container sizes to be provided to Single - Family, Multi - Family, 2453 Commercial, and Agency Facility Customers are specified in Attachment D. 2454 2. Color. The colors of the Containers provided to Single - Family, Multi - Family, 2455 Commercial, and Agency Facility Customers are specified in Attachment D. Franchise Agreement for Collection Services with Recology San Mateo County City of Redwood City ATTY /AGR/2010.014 040510 Page 61 of 115