Agmt13 Carollo Engineers, Inc. - Laserfiche WebLink

Browse Search

estimates, and other documents, including but not limited to, details, catalogue cuts and product literature for major products. 2. Prepare and submit draft pump station control strategy. 3. Perform SCADA system design. Provide draft SCADA strategy/programming report. Initiate PLC programming. Coordinate with the City. Five (5) sets of ninety percent (90%) plans, specification outline, and Engineer's Estimate shall be presented to the City for review. A single marked set will be returned along with City staff's comments and/or request for clarifications to the Consu Itant for revision. One meeting shall be scheduled with City staff after review of the 90% submittal prior to proceeding with the 100°/o Final Design Submittal. Deliverables: • 90% plans, specifications, and other items as outlined in Task 4.1, 4.2, and 4.3 Assumptions: • Consultant's base effort and budget is based on using a factory pre-packaged pump station with submersible pumps with MCC and control panel, including precast wet well and valve box, , diesel generator with factory acoustical enclosure, and a manual trash rack in the manhole upstream of the pump station. TASK 5—FINAL DESIGN (100% DESIGN SUBMITTAL) The Consultant shall proceed w ith the Final Design and the preparation of the improvement plans and specifications. Consultant shall: 1. Incorporate 90% Design Submittal review comments. Prepare 100°/a Design Submittal consisting of complete construction documents including drawings, specifications and cost estimates. 2. The 100% Design Submittal shall include, but not limited to, demolition plan, site grading and piping plan, general and construction notes, connection details, electrical details, structural details, technical specifications, and estimate of construction costs. The design calculations and analysis should include all final engineering calculations, any miscellaneous technical data, and catalogue cuts for any special equipment. 3. Submit final control strategy report and final (tested) SCADA/PLC program. 4. The 100% Design Submittal shall be ready for signature and submitted to the City for review and approval. A marked set will be returned along with staff's comments and/or request for clarifications for revision. Consultant shall furnish one (1) set of full-size plans and specifications for the project. Both sets of documents shall bear the responsible engineer's wet stamp and signature with a license expiration date. Consultant shall also furnish an electronic copy of the drawings in AutoCAD (version 2004 or latest) and in PDF format, specifications in Word, and cost estimate. Deliverables: • Provide final design plans, specifications, and documents as outlines in Task 5.1 to 5.4 Assumptions: • Consultant's base effort and budget is based on using a factory pre-packaged pump station with submersible pumps with MCC and control panel, including precast wet well and valve box, diesel generator with factory acoustical enclosure, and a manual trash rack in the manhole upstream of the pump station. ATTY/AGR/2012.206/CAROLLO FOR$218784 REV:12-20-12 VR Page 12 of 16