Laserfiche WebLink
E. The rail system track shall be one-piece construction, cold roll-formed steel. <br /> 2.02 RAIL SYSTEM <br /> A. 12 gauge, cold roll-formed, zinc plated steel track sections. <br /> B. Length: 8 foot maximum per section; 4.4" H x 3.4" W <br /> C. Weight: 37 Ibs, per 8 foot section <br /> D. Installation: Secured to the downrange cross members by steel rail hangers. <br /> 2.03 TARGET CARRIER <br /> A. 30" L x 16.7" H x 10"W <br /> B. Weight: 701bs. <br /> C. Target Rotation Angle: 360 degrees in 90 degrees increments <br /> D. Target Rotation Motor: 30 RPM (min) <br /> E. Target Carrier Backer/Paper Target: 35" x 45" (max) <br /> F. Target Carrier Target Weight: 2 Ibs. (0.91 kg) (max) <br /> G. Target Carrier Range Positional Accuracy: 0.75" <br /> H. Target Carrier Variable Speed Movement: 8 ft/s (max) <br /> I. Installation: Supported on the track by eight wheels. Four lower wheels shall <br /> be spring loaded against the track. <br /> J. Operating Temp: +/-40 degrees Celsius. <br /> 2.04 ELECTRICAL ASSEMBLY <br /> A. Input Power: 30VDC <br /> B. Power Consumption: 48W <br /> C. Operating Temperature: 0- 104 degrees F (0—40 degrees Celsius) <br /> D. Non-Operation [Storage] Temperature: -40— 158 degrees F (-40—70 <br /> degrees Celsius) <br /> E. Humidity: < 80% @ 30 degrees Celsius (86 degrees F), non —condensing <br /> 2.05 TOUCH SCREEN CONTROLLER <br /> A. Wirelessly controls carrier's operation shall be via 802.15.4 communication <br /> protocol. <br /> B. Places the target down range at any distance in feet, yards or meters. <br /> C. Control commands such as face, edge, left and right turning with one-touch <br /> operation. Must be capable of programming in static or looping courses of <br /> fire. <br /> PART 3: EXECUTION <br /> 3.01 GENERAL INSTALLATION <br /> A. Equipment shall be installed in accordance with the manufacturer's <br /> instructions. <br /> B. Where specific installation details are not specified or shown on the drawings, <br /> installation recommendations from the equipment manufacturers shall be <br /> 14 <br />